upangler.com

Please login or register.

Login with username, password and session length
Advanced search  

News:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Lowe Troller

Pages: [1] 2 3 4
1
Classifieds/Buy/Sell / Re: WTB 150 -200 hp 2 stroke outboard
« on: August 17, 2017, 12:26:34 PM »
Thanks Kevin. I appreciate the insight. You're right about making the wrong purchase used, that's why I was starting local. We have a good group of fisherman around here that try to take care of one another and sometimes you know a little more about a local motor.
Definitely can be frustrating, but glad I got a beater 16 foot back-up boat. Won't miss the fall run!

Thanks,
Chad

2
Classifieds/Buy/Sell / WTB 150 -200 hp 2 stroke outboard
« on: August 14, 2017, 09:31:09 PM »
My 1987 Yamaha 175 hp just gave up the ghost on my 20 ft. Grady White, so I am looking to re-power. Looking for 150-200 hp with a 25 inch shaft length. Perhaps somebody is looking to upgrade to a four stroke and has a solid two stroke, or knows somebody who does. At this point, I am open to different options 90's or 2000's, or even a solid late 80's. Of course an older Yamaha will plug and play on my set-up, but open to anything.

Thanks,

Chad

3
South Shore Fishing Association / Re: KIDS FISHING DAY
« on: June 21, 2015, 03:48:15 PM »
It was great to see all the smiles on the kids faces as they were casting their new rod and reel combos. Thanks for the great day! :thmb:

4
Classifieds/Buy/Sell / Re: Outriggers For Sale
« on: June 16, 2015, 09:15:49 PM »
New price! A six pack of Grand Rabbits or 3 Finn spoons!  :beer:

5
Classifieds/Buy/Sell / Outriggers For Sale
« on: June 12, 2015, 03:16:00 PM »
A pair of 14 foot Outriggers off my 20' Grady White. All rigging seems to be in place including glass rings. I have never used them and have no need for them. $50.

Chad 906-273-0280

6
Lake Superior / Re: Chinook Salmon Net Pen Stocking in Marquette
« on: May 05, 2015, 10:18:10 PM »
Thanks for the update Becky. Keep up the good work. :thmb:

7
Lake Superior / Re: Lower Harbor cleaning station???
« on: May 02, 2015, 09:08:41 PM »
Was not open as of 8 hours ago. Turns out I did not need it today. Could of used it to clean two yesterday though.

8
Boat and Tackle Setups / Re: Drill Once! AskTwice!!
« on: April 26, 2015, 06:48:36 AM »
Thanks Adam. Good thoughts. Anyone else?

9
Off Topic / Re: New ride
« on: April 25, 2015, 09:36:01 PM »
Sorry to hear that. It sure looks like a sweet ride on Craigslist, but I'm sure pictures don't show problems. Too bad the guy didn't just level with you and save you the driving and the heartbreak.  sad()

10
Boat and Tackle Setups / Drill Once! AskTwice!!
« on: April 25, 2015, 08:07:38 PM »
Drilling tomorrow to put the rod holder trees in. Looking to run a dipsy and two boards on each side. Dance floor is approximately 8 x 8. I am going to run riggers on 45 degrees this year which makes the 5 foot boom stick out 3 feet wider than the transom width. I use 10 foot dipsy rods so should clear the rigger lines.

Is there anything else I should consider as far as how far aft or forward to put these. Right now they are about at the half-way point o dance floor (50 inches from back-- 20 foot boat).

Appreciate any comments or suggestions before the drill comes out tomorrow.

Thanks.

11
Boat and Tackle Setups / Re: Bert's Rod Holder Install Question
« on: April 20, 2015, 05:20:16 PM »
Not sure what the underside of the rail looks like,

I think it is fiberglass over wood substructure. I was thinking about through bolting the rail bases and backing them either with an aluminum plate, or large washers.

Thanks for the tips about the caps.

12
Boat and Tackle Setups / Re: Bert's Rod Holder Install Question
« on: April 18, 2015, 09:06:09 PM »
Thanks Dan. Great idea on the caps. (I had to google Chicago screws to see what they looked like. Basically a screw-rivet hybrid-- cool!)

I decided to buy the 6 inch tracks for the bottom of the pedestal and make sure I do it right and make it secure.

13
Boat and Tackle Setups / Bert's Rod Holder Install Question
« on: April 18, 2015, 04:07:09 PM »
I'm planning on installing these two rod holder trees on my Grady White next week. My original thinking was to buy a 6" track and back it with a plate or large washers and put the pedestal in the track. However, I was wondering if I could directly install the pedestal to the rail and back it with plate or washers. Wasn't sure if the second way is strong enough for magnum dipsies. I'm really interested if you guys think both ways would be strong enough, or just the first way.

Also, I don't have easy access to my rails so I was planning on cutting out an access panel on both sides and installing marine speakers for a stereo. Kind of a 2 for 1 deal.

Let me know what you guys think,

14
Off Topic / Re: Boat Name Changes.....how to avoid bad luck?
« on: April 15, 2015, 11:24:21 PM »
There can be a lot of luck out on the seas.

Good luck- A double limit when you take your friend who doesn't know how to fish.
Bad luck- engine problems, skunks, dead batteries, and even once a fire in the outboard.

I like the traditions associated with the naming practices of boats, it's kind of cool. But as for giving credit, sacrifice, or prayers to Poseidon and Neptune -- Not me! (And these pretender are certainly not getting any of my beer.)  :beer:

Blessed are those whose help is the God of Jacob,
    whose hope is in the Lord their God.
He is the Maker of heaven and earth,
    the sea, and everything in them—
    he remains faithful forever. (Psalm 146:5-6)

15
No problem. Thanks for considering.

Pages: [1] 2 3 4